Arrowify

Docs

Everything the plugin does, in the order you will need it.

Before you start

Will it work in my file?

Four things decide whether the first arrow goes well. Tick them off here before you open Figma.

  • Arrowify runs in Figma Design, not in FigJam. FigJam has connectors of its own.

  • An arrow needs a start and an end. Any two layers work, not only top-level frames: also a button inside a frame, or a layer inside a component instance.

  • A Figma plugin only runs while it is open, so arrows follow only then. Arrowify shrinks to a small pill, and it brings every arrow up to date the moment you open it again.

  • They are drawn into the file as vectors, so everyone who opens it sees them, with or without the plugin. Hide them all with one click for a clean export.

Tick what is true; what is not shows how to fix it.

Start here

Install & open

01

Install the plugin

Open Arrowify in the Figma Community and press Open in Figma. It works in Figma Design files. FigJam has connectors of its own, so Arrowify does not run there.

02

Open it

In a design file, choose Plugins → Arrowify → Open Arrowify. A panel opens with the arrow settings at the top and one button at the bottom. There is nothing to set up and no account to create.

03

Leave it open

Arrows follow their layers while the panel is open. The small button at the top right shrinks the window to a pill that says following and stays out of the way; arrows keep following in that state. The pill beside it says Free or Pro and opens the licence screen.

The basics

Draw your first arrow

01

Select two layers

Click the layer the arrow should start at, then Shift-click the one it should end at. The order of selection is the direction of the arrow. Any layer will do — a frame, a button inside a frame, a layer inside a component instance.

02

Press Connect

The button sits fixed at the bottom of the panel and always says what will happen. The arrow is drawn with the settings the panel shows, and it is left selected, so anything you change next changes that arrow.

03

Move something

Drag one of the two layers. The arrow follows, and picks a new route if the old one no longer fits. It is an ordinary layer in your file, named after the two layers it connects — Start → Sign in.

The button, in the five states it goes through.

Already connected

The button says this when an arrow from the first layer to the second exists. Arrowify does not draw the same arrow twice. To turn one around, use Swap direction.

More than two layers

Select three or more and the button counts the arrows it will draw — Connect · 3 arrows. Each layer is connected to the next, in the order you selected them.

Without the panel

Plugins → Arrowify → Connect selection draws the arrows with the settings you used last and closes again. Good for a keyboard shortcut. Arrows are drawn when you ask for them — never by Shift-selecting alone.

The basics

Change an arrow

There is no separate edit screen. The panel always shows one set of controls, and what they act on depends on what is selected. Every control applies the moment you click it.

Select the arrow

Click its line or its label. The controls show that arrow's settings and change it. Select several arrows and they all change together.

Or select the two layers it connects

Nobody should have to hit a thin line with the mouse. Select the two connected layers, or a whole chain of connected layers, and the panel edits the arrows between them.

Or select one layer

The controls then apply to every arrow that starts or ends at that layer. A line under the button says how many arrows that is.

Swap direction

Turns the selected arrows around: start and end change places, and so do the sides they attach to.

Remove arrow

Deletes the selected arrows. This button, and deleting a layer yourself in Figma, are the only ways an arrow disappears.

The next arrow

Shape, line, thickness, ends, colour and Other layers are remembered: what you chose last is how the next arrow is drawn. Settings are kept per Figma account, so they are still there tomorrow.

Free

Arrow settings

The top section of the panel. All of it is free, on any number of arrows.

Shape

  • Straight
    One direct line. With both sides on Auto it aims from centre to centre and stops at the edge of each layer.

  • Right angles, sharp corners
    Runs only horizontally and vertically, with square corners.

  • Right angles, round corners
    The same route with rounded corners. This is what a new file starts with.

  • Curved
    One smooth curve that leaves and arrives at a right angle to the layer.

An arrow with right angles never runs through the two layers it connects. It looks for the shortest way around them with the fewest corners.

Line

  • Solid
    An unbroken line.

  • Dashed
    Dashes that grow with the thickness, so a bold dashed arrow still reads as dashed.

  • Dotted
    Short dots, spaced by the thickness as well.

Thickness

  • Thin
    1 px.

  • Normal
    2 px. The default.

  • Bold
    6 px.

  • Extra
    12 px, for a flow that has to be read from across the room.

There are exactly these four, so Bold is the same bold on every arrow in the file.

Start and End

What sits at each end of the line. Two rows with the same five choices; Start is where the arrow begins, End is where it points.

  • Nothing
    The line simply ends. The default for Start.

  • Line arrow
    An open arrowhead. The default for End.

  • Triangle arrow
    A filled arrowhead.

  • Circle
    A filled dot.

  • Diamond
    A filled diamond.

An arrowhead at both ends makes a two-way arrow.

Start side and End side

Which side of the layer the arrow attaches to, separately for each end. It attaches at the middle of that side.

  • Auto
    The side that faces the other layer. Two layers side by side connect right to left, two stacked ones bottom to top — and the choice is made again when they move.

  • Top
    Always the top edge.

  • Right
    Always the right edge.

  • Bottom
    Always the bottom edge.

  • Left
    Always the left edge.

A fixed side stays fixed when the layers move. That is how a flow that has to read top to bottom keeps reading top to bottom.

Other layers

What the arrow does about layers that lie in its way: Over, Under or Around. The next chapter is about this one control.

Colour

Seven swatches — dark, white, red, yellow, green, blue and violet — and a plus that opens the colour picker for a colour of your own.

The default dark arrow would be invisible on a dark canvas. So when the page background is dark, a new arrow in the default colour is drawn white instead — and a white one is drawn dark on a light canvas. A colour you picked on purpose is left alone.

Free

Around, Over, Under

Between two screens there is often a third. The control named Other layers decides what an arrow does about it.

The three choices

  • Over
    The arrow lies on top of everything on the page and runs straight across whatever is in between. The default.

  • Under
    The arrow is moved to the bottom of the page, so it runs behind the other layers and shows only in the gaps between them.

  • Around
    The arrow takes a route that avoids the layers in its way.

Around, with right angles

The arrow finds a right-angled route past the layers between its two ends — short, and with as few corners as possible.

Around, curved

A curved arrow swings past the layer in one curve, on whichever side is shorter. Where no single swing gets past everything, it takes the right-angled way around with wide, soft corners.

Around, straight

A straight arrow stays straight as long as nothing is in its way. When something is, it takes a right-angled detour — a straight line has no other way around.

What counts as in the way

The visible layers on the page, and the ones inside sections. The arrow's own two layers and the frames they sit in do not count, and neither do hidden layers or other arrows.

When things move

An arrow set to Around looks again whenever a layer on the page moves, because that layer may now be in its way, or no longer be.

What it does not do

It considers the 12 layers nearest to the arrow, not every layer on a crowded page. And arrows do not avoid each other — two arrows may cross.

Pro

Labels & numbers

A word on the arrow — Yes, No, Wrong password — and a step number in front of it. Select an arrow first; the two fields act on the selection.

Text

Type the label and press Enter. With several arrows selected, the same text goes on all of them at once. An empty field removes the label.

Number

A step number, kept apart from the text and shown in front of it: 3 · Yes. Without text the number stands alone. With several arrows selected, type the number to start at and they are counted upwards from it; an empty field takes the numbers away.

Size

S, M, L and XL — 11, 14, 20 and 28 px type, with padding and border to match. M is the default.

Style

  • Outline
    White, with the arrow’s colour around it. The default.

  • Filled
    Filled with the arrow’s colour. The text turns dark or white, whichever can be read on it.

  • Text only
    Just the text, in the arrow’s colour, on a patch of the canvas colour so the line does not run through the letters.

Shape

  • Pill
    Fully rounded ends. The default.

  • Rounded
    A rectangle with soft corners.

  • Square
    Sharp corners.

Font and Weight

Any font family Figma offers you, and any of its weights. The default is Inter Medium. The switch beside the weight — Aa / AA — sets the label in capitals without changing what you typed.

If a colleague opens the file without that font, the label keeps the font it has rather than being replaced with something else.

Colours

Fill, Border and Text, each with the same swatches as the arrow and a colour picker. Automatic follows the label style and the arrow’s colour, so a label changes with its arrow. None switches a fill or a border off.

Where a label sits

Half-way along its line. If it would cover another label or a layer there, it moves along the line to the first spot where it covers neither. On a page so full that no spot is free, it takes the one that covers least.

Always above the lines

A label is its own layer at the top of the page, not part of the arrow’s group. Only that way can it lie above every line, including other arrows’. It is hidden with its arrow and removed with it.

Pro

Saved styles

A saved style is a named look — arrow settings and label settings together. It is stored in the file, not on your machine, so everyone who opens the file sees the same set. A file starts with four: Main path, Error, Optional and Back.

What a style holds

Shape, line, thickness, both ends, colour, and everything about the label’s look. Not the sides and not Other layers — those belong to each arrow, because they depend on where it runs.

Use one

Click a style in the list. It is applied to the selected arrows and used for the next ones you draw. Click it again to stop using it.

Edit one

Click the pencil. A pink bar at the top says which style you are editing, and from then on the controls change the style itself: every arrow that uses it changes with it. The bar also says how many arrows on this page that is. Press Done to leave.

Save a new one

Set the controls the way you want, then press “Save the current settings as a new style”. The style is created, applied to the selection, and opened for editing so you can name it.

Rename and delete

While a style is being edited its name can be typed over, and a bin beside it deletes the style. Arrows that used it keep the look they have.

One arrow that differs

Change a control on an arrow that uses a style, without the pencil, and that arrow becomes a one-off: it keeps its new look and no longer follows the style.

Other pages, other people

Arrows on the page you are on change at once. Arrows on other pages, and in a colleague’s window, take the edited style the next time Arrowify brings that page up to date.

Pro

Chain, Branch, numbering

Select three or more layers and one press of Connect draws several arrows. This section of the panel — Connecting three or more layers — decides which ones.

The two ways

  • Chain
    Each layer to the next, in the order you selected them: A to B, B to C. This is what happens without Pro, too.

  • Branch
    The first layer you selected to every other one: A to B, A to C. For a decision with several outcomes.

Number the new arrows 1, 2, 3

Tick it and the arrows of one Connect are numbered in the order they are drawn. The numbers are ordinary step numbers — change or remove them later under Label.

The order is the order you clicked

Figma does not promise an order for a selection, so Arrowify keeps track of it while the panel is open. Click the layers one after the other in the order of the flow. Dragging a box around them gives no particular order.

Arrows that exist are skipped

The button counts only the arrows that are still missing. Add a fourth screen to a chain, select all four, and one arrow is drawn.

Pro

From prototype links

A prototype link is what you make in Figma’s Prototype tab: you drag from a layer — a button, say — to the frame it should open, and choose a trigger such as On click. It is what makes a prototype move from screen to screen when someone presents it. Figma shows those links only while you are in the Prototype tab; they are not part of the design, and they do not appear in an export or to someone looking at the canvas.

Draw arrows from prototype links turns them into arrows that do. It reads every link on the current page and draws an arrow for each, from the layer that carries the link to the frame it opens.

Labelled with the trigger

Each arrow gets the link’s trigger as its label: On click, On hover, On press, On drag, After delay, Mouse enter, Mouse leave, Mouse up, Mouse down or Key press.

With the look the panel shows

The arrows are drawn with the current settings, or with the saved style that is in use. Restyle them afterwards like any other arrow.

Press it again later

Links that already have an arrow are skipped, so pressing the button after adding screens draws only the new ones.

What is left out

Links without a destination on this page: Back, an external URL, or a frame on another page.

It is a drawing, not a sync

The arrows follow their layers like all others, but they do not follow the prototype. Change or delete a link in the Prototype tab and the arrow stays as it was.

Reliability

Keeping arrows up to date

Arrows follow while Arrowify is open

Move, resize or rearrange a layer and its arrows are redrawn. Shrunk to the pill counts as open. Only the arrows attached to the layer that changed are recalculated — not every arrow on the page — so a big file stays quick.

Catch-up on opening

A Figma plugin only runs while it is open. So if layers moved while Arrowify was closed — by you, or by a colleague yesterday — the arrows are behind. The moment you open Arrowify, every arrow on the page is checked and corrected. Switch to another page with the panel open and that page is caught up too.

The relaunch button

On a page that has arrows, and on each arrow, Figma shows two buttons in its right-hand panel: Open Arrowify and Update arrows. One click, without a trip through the plugins menu.

Menu commands

Under Plugins → Arrowify: Open Arrowify opens the panel. Connect selection connects the selected layers with your last settings and closes. Update all arrows redraws every arrow on the current page and closes, then says how many it brought up to date.

Update, Select, Hide

Three links at the bottom of the panel, beside the count of arrows on the page. Update redraws them all. Select selects them all, to restyle a whole page in one go. Hide hides them all for a clean screenshot, and turns into Show.

A layer was deleted

Arrowify never deletes an arrow on its own. If one of an arrow’s two layers is gone, the arrow stays where it is, its name in the layers list gets a warning sign, and the panel counts it as loose. Undo the deletion and it is attached again.

Duplicating

Duplicate frames together with their arrow, with Arrowify open, and the copied arrow attaches itself to the copied frames. The same happens when you paste them onto another page. Duplicate only the frames and there is no arrow in the selection to copy.

Reliability

Removing arrows

From the panel

Select an arrow and press Remove arrow. Or select layers: a pink button beside Connect removes the arrows between them — or, with one layer selected, every arrow on that layer. It says how many before you press.

From the canvas

An arrow is a layer. Select it and press Delete, as with anything else in Figma. Its label goes with it.

Only for a while

Use Hide at the bottom of the panel. Hidden arrows stay connected and come back with Show.

Never by itself

Nothing in Arrowify removes an arrow unless you pressed a button that says Remove. Not a deleted layer, not an expired licence, not an update.

Licence

Licence & activation

Drawing arrows needs no key and no account. A key unlocks the Pro sections of the panel. There is no login and no password; the key is the whole account.

Paste the key

Buying on this site gives you a key that looks like AX-XXXX-XXXX-XXXX. In the plugin, click the Free pill at the top, paste the key and press Unlock. It is stored by Figma for the plugin on that device — never written into the file.

Pro: up to 3 accounts

Pro is €29 once, for one person, and the key works on up to 3 of your own Figma accounts — work, private, a client’s. Paste the same key while signed in to the other account.

Team: seats

Team is €3 per seat per month, from 3 seats, on one invoice. Everyone enters the same team key, and each Figma account that does takes one seat. The licence screen shows how many seats are in use and until when the plan is paid.

When the licence server cannot be reached

The plugin keeps working. Drawing never needs the network. A Pro key that was confirmed once stays unlocked without the server. A team key stays unlocked until the end of its paid period and 14 days beyond. A key entered during an outage is saved and checked the next time you open the plugin.

Restore a key

Lost it, or on a new computer? Open the dashboard, choose “Have it emailed to you” and enter the address you paid with. The mailbox is the proof of ownership. Step by step.

Reset a key

If a key ends up somewhere it should not be, or all its accounts or seats are taken, reset it in the dashboard. That issues a new key, stops the old one, and frees every account and seat.

Remove a key

“Remove key from this device” on the licence screen takes the key out of the plugin on that device. Your arrows, labels and saved styles stay in the file.

Privacy

Data & network

The plugin talks to exactly one domain, the licence server, and for one purpose: checking a licence key. It sends the key and your Figma user id. It never sends file content, layer names or labels. Without a key it sends nothing at all.

Arrows, labels and saved styles live in your Figma file and nowhere else. The full account, written for security reviews, is on Data and network.

Limits

What it cannot do

Arrows only move while the plugin is open

That is a limit of Figma plugins, not a setting. Arrows are corrected the moment Arrowify is opened, or by Update all arrows.

One page at a time

Following and catch-up work on the page you are on. Arrows on another page are brought up to date when you go there.

Around looks at the nearest 12 layers

On a very crowded page an arrow may still cross a layer further away. And arrows do not avoid each other.

Labels on a full page

A label keeps clear of other labels and of layers where there is room on its line. Where there is none, it overlaps as little as it can.

50 arrows at a time

The panel edits up to 50 selected arrows in one go. For more, do it in two selections — or use a saved style, which has no such limit.

Existing Autoflow arrows are not converted

Arrowify leaves arrows it did not draw alone: it does not move, restyle or delete them. Switching from Autoflow.

Figma Design only

Not FigJam, which has connectors built in.

When it goes wrong

Troubleshooting

My arrows did not follow after I reopened the file

Nothing is broken. A Figma plugin only runs while it is open, so arrows do not move while Arrowify is closed. Open Arrowify and it brings every arrow on the page up to date. On a page that has arrows, Figma also shows the buttons “Open Arrowify” and “Update arrows”, and the menu command “Update all arrows” does the same without opening the panel. While you work on a flow, leave Arrowify open; it shrinks to a small pill.

An arrow points at nothing

One of the two layers it was attached to has been deleted. Arrowify keeps the arrow where it is and flags it: its name in the layers list gets a warning sign, and the panel counts it as loose. It never deletes an arrow on its own. Undo in Figma brings the layer and the connection back; otherwise draw a new arrow to the new frame and remove the flagged one.

The arrow attaches on the wrong side

By default Arrowify picks the sides. To decide yourself, select the arrow, or the two layers it connects, and set “Start side” and “End side” to top, right, bottom or left. The arrow keeps those sides when the frames move. If it points the wrong way altogether, press “Swap direction”.

The arrow runs across another layer

Select the arrow and set “Other layers” to Around: it then takes a route past the layers in its way. “Under” is the other option; the arrow then runs behind those layers. Two limits: Around considers the dozen layers nearest to the arrow, and arrows do not avoid each other, so two arrows may still cross.

Can an arrow attach to a layer inside an instance or an auto layout frame?

Yes. Arrowify connects layers, not only top-level frames. For a layer inside a component instance, select the inner layer (a double-click, or Cmd/Ctrl-click, selects into the instance), Shift-click the target and press Connect. Frames inside sections and layers inside auto layout frames are connected the same way. If an arrow attaches somewhere odd, set its side explicitly.

How do I hide the arrows for a screenshot or an export?

Press “Hide” at the bottom of the Arrowify panel, and “Show” when you are done. Hidden arrows are not deleted and stay connected. “Select”, next to it, selects every arrow on the page, which is the quick way to restyle them all at once.

The Connect button is greyed out

The button itself says why. “Select two layers to connect” or “Shift-click a second layer” means fewer than two layers are selected; arrows themselves do not count. “Already connected” means the arrows this selection would draw exist, and the panel is editing them instead.

I change a setting and nothing happens

The controls act on the selection. With an arrow selected, or the layers it connects, a change shows on the canvas at once. With nothing selected, the same controls only set the look of the next arrow. If a pink bar at the top says “Editing style”, you are changing a saved style, and only arrows that use it change; press Done to leave.

I duplicated my frames and the copies have no arrows

Select the frames together with their arrows, then duplicate, with Arrowify open: the copied arrow attaches itself to the copied frames. If you duplicate only the frames, there is no arrow in the selection to copy, so the new frames start without any.

Pro is still locked after I paid

Paying does not unlock Pro by itself; the licence key does. Click the “Free” pill at the top of the panel and paste the key. It is in your dashboard and can be sent to your purchase email again. On a different Figma account than usual? A Pro key covers a limited number of your own accounts, and the dashboard shows how many are in use.

More help

  • Troubleshooting: Arrows that did not follow after reopening, a deleted target, the wrong side, layers in the way, instances, sections, auto layout, hiding arrows.
  • Restore a purchase: Lost the licence key, new computer, new Figma account. Takes about a minute.
  • Team licences: Per person or per team, invoices, reassigning seats, paying by bank transfer.
  • Data and network: What the plugin sends, to which domain, and what never leaves your file. For security reviews.
  • Switching from Autoflow: What is the same, what is different, and what happens to the arrows you already have.

Step-by-step guides and comparisons are under Guides; what changed in each version is in the changelog. Not answered anywhere? Write to hello@arrowify.app with the file or a screenshot.